基于数值模拟的超塑成形压力—时间曲线计算机辅助设计

确定压力随时间变化的关系曲线对于超塑成形工艺设计非常重要，本文在超塑成形压力计算时引入能量消耗控制策略，提出了一种压力－时间（Ｐ－Ｔ）曲线设计方法即恒能耗率法，实现了基于有际元数值模拟的超塑成形Ｐ－Ｔ曲线计算机辅助设计，文中对有关的压力控制算法及算式进行了较详细的介绍和推导，分别给出了半球壳自由胀形和圆筒形凹模约束成形过程的Ｐ－Ｔ曲线设计计算实例，并对计算结果进行了讨论，本文的研究拓宽了刚粘塑性有     

Optimum parameter matching obtained by experiments for coring drilling into lunar simulant

This paper performs a series of ground experiments (on the Earth) to obtain optimum parameter matching for a future core drill on the Moon. Three common stages, I, II, III, are recognized with respect to the cut per revolution (CPR), which is defined as the ratio between the feeding speed and the rotating speed. The optimum matching between the feeding speed and the rotating speed for drills locates at the boundary position between Stage II and Stage III, where the coring rate saturates and the weight on the bit and the driving torque are still low. Further data analysis of the ground experiments reveals that the optimum matching signifies a proportional relation between the maximum conveying rate (MCR) by the groove of the auger and its rotating speed. The kinetic analysis in an ideal condition without gravity, the friction from the auger groove and the pressure at the bit confirm a similar proportion. The correlation between the proportions needs further study to determine whether the optimum matching obtained on the ground can be directly applied to future drills on the Moon.     

IETM制作平台设计与应用

提出了一种用于大型装备的交互式电子技术手册(IETM)制作平台模型。介绍了平台的物理架构、功能架构和信息交换流程,给出了半结构化数据编辑、三维仿真和图形化故障隔离等关键技术。应用结果表明:基于新模型的IETM制作平台能快速实现电子手册制作,且展示效果和交互能力较强。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

Coupling damage and reliability model of low-cycle fatigue and high energy impact based on the local stress–strain approach

Fatigue induced products generally bear fatigue loads accompanied by impact processes,which reduces their reliable life rapidly. This paper introduces a reliability assessment model based on a local stress–strain approach considering both low-cycle fatigue and high energy impact loads.Two coupling relationships between fatigue and impact are given with effects of an impact process on fatigue damage and effects of fatigue damage on impact performance. The analysis of the former modifies the fatigue parameters and the Manson–Coffin equation for fatigue life based on material theories. On the other hand, the latter proposes the coupling variables and the difference of fracture toughness caused by accumulative fatigue damage. To form an overall reliability model including both fatigue failure and impact failure, a competing risk model is developed. A case study of an actuator cylinder is given to validate this method.     

微小型数据采集系统优化设计方法研究

微小型数据采集系统一般是基于微控制器进行设计的,存储设备主要为SD卡,由于微控制器资源有限,因此很难在保证微小型数据采集系统较高采集速度的同时保证采集系统的可靠性.针对该问题,本文分析了影响数据采集系统采集速率及可靠性的主要影响因素,推导了DMA缓冲区设置大小与数据采集系统采集速率及可靠性之间的模型,并设计了数据采集系统主要参数标定与验证试验.试验结果表明,本文提出的数据采集系统设计方法合理、可根据数据采集处理器内存大小、SD卡文件系统性能指标设计数据采集系统,确保数据采集系统的可靠性,对提高系统设计效率、降低微小型数据采集系统的设计成本以及后续改进完善数据采集系统奠定了重要的理论基础.     

单天基平台测向的空间非合作目标跟踪

针对仅含角度测量信息的单个天基平台可观测性较弱的问题,提出了一种含脉冲机动检测的空间非合作目标跟踪算法,并设计了非合作目标实时跟踪数据处理流程.该算法利用抗差估计技术和UKF（Unscented Kalman Filter,无迹卡尔曼滤波）算法构造目标跟踪滤波器,并综合残差多项式拟合和新息分布特征等方法实现目标机动检测,在天基平台观测信息类型有限和观测几何较差的情况下,可以同时排除孤立野值和成片测量野值的影响,实现非合作机动目标的连续稳定跟踪.数值实验验证了算法的可行性和有效性,也表明了跟踪精度和可靠性与测量精度密切相关.     

一种实用的弹-地通讯接口设计

为实现普通个人计算机和弹载计算机间的弹一地通讯,对某型弹载计算机专用的增强型通讯接口电路和通讯协议进行了分析,设计了与之匹配的适用于普通计算机的通讯接口硬件电路,并进行了基于VB6．0的通讯程序设计。实际测试及运行结果说明,设计的通讯接口可实现高速、远距离、高可靠性的弹一地数据通讯,误码率低。     

双重失效模式下民用航空发动机高压涡轮叶片报废特性与可靠性分析

基于某型民用航空发动机下发后观测涡轮叶片报废状态的双重失效模式,计算了高压涡轮(HPT)叶片由自新使用循环数(CSN)引起的报废率.并结合疲劳损伤累积理论,探究了叶片报废率与失效分布函数之间的关系,得到了涡轮叶片失效分布与寿命期望的计算方法.基于大量涡轮叶片的观测数据,拟合出涡轮叶片按CSN计的失效分布,研究发现:某型...